HPA Parts & Accessories

Sorteer op
  • Balystik 1/8 NPT  HPA  Male Quick Disconnect (QD) Fitting Assembly (female thread to US male fitting Coupler /Adapter /Connector  for 6mm macroline)
    Balystik 1/8 NPT HPA Male Quick Disconnect (QD) Fitting Assembly (female thread to US male fitting Coupler /Adapter /Connector for 6mm macroline)

    Balystik 1/8 NPT HPA Male Quick Disconnect (QD) Fitting Assembly (female thread to US male fitting Coupler /Adapter /Connector for 6mm macroline)∙ Thread already comes with PTFE coating for perfect sealing
    ∙ 200psi max…

    € 9,90
  • Balystik HPA Drop-in Adaptor for AEG Stock Tube
    Balystik HPA Drop-in Adaptor for AEG Stock Tube

    Balystik HPA Drop-in Adaptor for AEG Stock TubeThis adapter replaces the spring guide of a GearboxV2 when you set an HPA Drop in System. It allows to come fix the screw of the butt tube while avoiding contact with the solenoids,…

    € 5,90
  • High Quality Silliconen Tank O-ring - (3-Pack) Fits all Co2 HPA Tanks
    High Quality Silliconen Tank O-ring - (3-Pack) Fits all Co2 HPA Tanks

    High Quality Silliconen Tank O-Ring (3-Pack) (3-Pack) Fits all Co2 HPA Tanks
    Fits all Co2 HPA Tanks.Co2 Tank o-rings are universal with all brands of Co2 and HPA tanks manufactured for use in the sport of paintball &…

    € 3,50
  • Balystik Spare Key for HPR800C HPA Regulator V1 & V2
    Balystik Spare Key for HPR800C HPA Regulator V1 & V2

    Balystik Spare Key for HPR800C HPA Regulator V1 & V2

    € 4,90
  • POLARSTAR Wire Harness MCU. (3 pin JST/ A&K Connector) POLARSTAR Wire harness for Amoeba HPA systems - Lenght 18" 45cm
    POLARSTAR Wire Harness MCU. (3 pin JST/ A&K Connector) POLARSTAR Wire harness for Amoeba HPA systems - Lenght 18" 45cm

    POLARSTAR Wire Harness MCU. (3 pin JST/ A&K Connector. 18" 45cmThe MCU wire harness is intended for use with REV3 FCU's that feature the built in MCU (Motor Control Unit) for running the replica's box magazine. This model features…

    € 19,90
  • POLARSTAR Trigger Lead FEM60
    POLARSTAR Trigger Lead FEM60

    POLARSTAR Trigger Lead FEM60This trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as only M60. They connect the original snap action trigger switch to the…

    € 9,90
  • POLARSTAR Universal Plugboard. Includes Heat Shrink
    POLARSTAR Universal Plugboard. Includes Heat Shrink

    POLARSTAR Universal Plugboard. Includes Heat ShrinkThe Universal Plugboard is used in all of our MG series kits such as the M249 and is used across all of our systems including the Fusion Engine. It is also useful for custom…

    € 27,90
  • POLARSTAR  Fusion Engine™ Nozzle M4/M16
    POLARSTAR Fusion Engine™ Nozzle M4/M16

    POLARSTAR Fusion Engine™ Nozzle M4/M16The air nozzles for the Fusion Engine come in up to 6 different colors which identify how much the nozzle restricts air flow out of the engine. This starts at the Green nozzle which has the…

    € 26,90
  • Balystik complete HPA line - 8mm - braided EU (Deep Grey)
    Balystik complete HPA line - 8mm - braided EU (Deep Grey)

    Balystik complete HPA line - 8mm - braided EU (Deep Grey)The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so…

    € 45,90
  • Balystik Premium Pneumatic Maintenance Grease for HPA / AEG /GBB
    Balystik Premium Pneumatic Maintenance Grease for HPA / AEG /GBB

    Balystik Premium Pneumatic Maintenance Grease for HPA / AEG / GBBBalystik SavGrease is specially blended for minimal "stiction", and maximum part movement. Adheres to the part, and stays where you put it. Ideal for use on o-rings…

    € 14,90
  • Balystik Protective cap for HPA tank preset (Black)
    Balystik Protective cap for HPA tank preset (Black)

    Balystik Protective cap for HPA tank preset (Black)∙ 3D printed cap with high resistance (ASA) polymer
    ∙ Prevent damage the thread of your bottle in case of hurt
    ∙ Screws onto all paintball tank presets
    ∙ Tank & preset not…

    € 5,50
  • POLARSTAR Trigger Lead 6" Universal. (2 pin JST/ Bare Lead)
    POLARSTAR Trigger Lead 6" Universal. (2 pin JST/ Bare Lead)

    POLARSTAR Trigger Lead. 6" Universal. (2 pin JST/ Bare Lead)The trigger lead is mainly used for soldering into the existing trigger switch of an AEG gearbox such as on VFC HK417 or Classic Army KAC LMG.

    ∙ 6" length
    ∙ 2pin JST…

    € 6,90
  • ASG 7.4v LiPo 250mAh 20C Battery
    ASG 7.4v LiPo 250mAh 20C Battery

    Battery for HPA. To use the fire control unit (FCU).

    ∙ For LiPo use specific balance charger!
    ∙ JST (connector) discharge plug included with battery
    ∙ Low level 250mAh capacity
    ∙ Wired to fit in crane stock or grip

    This…

    € 15,90
  • Titan Power Li-on HPA V2 - 350mAh 7.4v  JST (HPA)
    Titan Power Li-on HPA V2 - 350mAh 7.4v JST (HPA)

    Titan Power Li-on HPA V2 - 350mAh 7.4v JSTUnder Discharge, Over Charge, and Short Protection
    Titan Power HPA batteries are protected from active-drawing HPA systems such as Polarstar and Wolverine, and will never allow itself to…

    € 19,90
  • VB POWER Lipo 7.4V 300mAh 35C/70C for Polarstar FCU (HPA)
    VB POWER Lipo 7.4V 300mAh 35C/70C for Polarstar FCU (HPA)

    VB POWER Lipo 7.4V 300mAh 35C/70C for Polarstar FCU (HPA)∙ Voltage: 7.4 Volt (2 Cells)
    ∙ Capacity: 300 mAh / 35 C
    ∙ Charging current (max.): 0.3 A
    ∙ Discharge current (max.): 10.5 A
    ∙ Watthour: 2.2 Wh

    € 14,90
  • POLARSTAR  Braided Air Line ™  (42" Black)
    POLARSTAR Braided Air Line ™ (42" Black)

    POLARSTAR Braided Air Line ™ (42" Black)Highly flexible rubber air line reinforced with a nylon braided sheath promotes maximum mobility while reducing the risk of kinking.

    ∙ Fitted with standard QD couplings
    ∙ Lightweight…

    € 64,90
  • POLARSTAR  Braided Air Line ™  (36" Black)
    POLARSTAR Braided Air Line ™ (36" Black)

    POLARSTAR Braided Air Line ™ (36" Black)Highly flexible rubber air line reinforced with a nylon braided sheath promotes maximum mobility while reducing the risk of kinking.

    ∙ Fitted with standard QD couplings
    ∙ Lightweight…

    € 64,90
  • Balystik female Coupler /Adapter /Connector for regulator - 1/8 NPT male thread US - Gold / Silver
    Balystik female Coupler /Adapter /Connector for regulator - 1/8 NPT male thread US - Gold / Silver

    Balystik female Coupler /Adapter /Connector for regulator - 1/8 NPT male thread US - Gold / Silver∙ 2 in 1 connection including a female coupler and a with 1/8 NPT male thread
    ∙ US version
    ∙ Gold / Silver color

    It is…

    € 14,90
  • Dominator HPA Tank Regulator Burst Disc replacement Chrome (4.5K) Input
    Dominator HPA Tank Regulator Burst Disc replacement Chrome (4.5K) Input

    Dominator HPA Tank Regulator Burst Disc replacement Chrome (4.5K) Input∙ HPA Tank Regulator Replacement burst disk for an 4500-5000 psi regulator with an 3K output and 4.5/5K input pressure
    ∙ 3K Output Burst Disc

    ∙ 1.8K…

    € 7,90
  • Dominator HPA Tank Regulator Burst Disc replacement Chrome (3K) output
    Dominator HPA Tank Regulator Burst Disc replacement Chrome (3K) output

    Dominator HPA Tank Regulator Burst Disc replacement Chrome (3K) output∙ HPA Tank Regulator Replacement burst disk for an 4500-5000 psi regulator with an 3K output and 4.5/5K input pressure
    ∙ 3K Output Burst Disc

    ∙ 1.8K 1800…

    € 7,90
  • HPA Tank Regulator Burst Disc replacement Chrome (1.8K) 1800 (output)
    HPA Tank Regulator Burst Disc replacement Chrome (1.8K) 1800 (output)

    HPA Tank Regulator Burst Disc replacement Chrome (1.8K) 1800 (output)∙ HPA Tank Regulator Replacement burst disk for an 4500-5000 psi regulator with an 1.8K output and 4.5/5K input pressure
    ∙ 1.8K Output Burst Disc

    ∙ 1.8K…

    € 7,90
  • POLARSTAR F2™ Nozzles
    POLARSTAR F2™ Nozzles

    POLARSTAR F2™ Nozzle∙ Drop in nozzle for PolarStar F2 HPA engines
    ∙ Machined aluminum construction
    ∙ Anodized finish
    ∙ Material: Aluminum
    ∙ Manufacturer: PolarStar

    ∙ Compatibility: Polarstar F2 HPA Engines Used in…

    € 34,90
  • Balystik internal spare parts for HPR800C regulator
    Balystik internal spare parts for HPR800C regulator

    Balystik internal spare parts for HPR800C regulator ∙ Replacement parts for HPR800C V1, V2 & V3

    € 16,90
  • POLARSTAR Switchboard, V2, F2, F1 & JACK (FUSION ENGINE Excluded)
    POLARSTAR Switchboard, V2, F2, F1 & JACK (FUSION ENGINE Excluded)

    POLARSTAR Switchboard V2This switchboard is designed to replace the original trolley type trigger switch in a traditional TM spec V2 gearbox. It is not compatible with variants of the V2 gearbox which use a snap-action/microswitch…

    € 34,90
  • POLARSTAR Wire Harness Rev. 2 - Lenght 18" 45cm
    POLARSTAR Wire Harness Rev. 2 - Lenght 18" 45cm

    POLARSTAR Wire Harness Rev. 2 - Lenght 18" 45cmNew quality electric wire with RCY connectors ideal replace to your damaged original wire suitable for FUSION ENGINE or JACK devices dedicated custom version for AMOEBA rifle…

    € 12,90
  • POLARSTAR Complete Seal Set, MR - Micro Regulator
    POLARSTAR Complete Seal Set, MR - Micro Regulator

    POLARSTAR Complete Seal Set, MR - Micro RegulatorSet includes:∙ 2x M1.5 x 4.5 (Buna 70) - Body ID
    ∙ 1x M2.0 x 14.0 (Buna 70) - Piston OD
    ∙ 1x Base Seal
    ∙ (Covers GEN1 and GEN2)

    € 3,90
  • POLARSTAR Fusion Engine™  Nozzle M249
    POLARSTAR Fusion Engine™ Nozzle M249

    POLARSTAR Fusion Engine™ Nozzle M249Features∙ Drop in nozzle for PolarStar F2 HPA engines
    ∙ Machined aluminum construction
    ∙ Anodized finish
    ∙ Compatibility: Polarstar F2™ HPA Nozzle M249
    ∙ Material: Aluminum
    ∙…

    € 24,90
  • Kythera™ SA Nozzles Nozzle
    Kythera™ SA Nozzles Nozzle

    Kythera™ SA Nozzles Nozzle ∙ Drop in nozzle for PolarStar Kythera™ HPA engines
    ∙ Machined aluminum construction
    ∙ Anodized finish
    ∙ Material: Aluminum
    ∙ Manufacturer: PolarStar
    ∙ Compatibility: Polarstar Kythera™…

    € 33,90
  • Dominator HPA Tank Regulator for 4500PSI
    Dominator HPA Tank Regulator for 4500PSI

    Weight: 120 g
    Shipping weight: 130 g

    € 46,90
  • EPeS airsoft HPA QD Coupling (Foster) Female-Male Thread
    EPeS airsoft HPA QD Coupling (Foster) Female-Male Thread

    EPeS airsoft HPA QD Coupling (Foster) Female-Male ThreadQD high quality coupling, fully compatible with EPeS adapters for GBB magazines. The coupling is self-closing, ie. After shutting off the HPA system hose, it closes itself…

    € 19,90
  • POLARSTAR Switchboard for HK417/G28 Series, F2, F1 and JACK (Post, Spring and 6" trigger lead included)
    POLARSTAR Switchboard for HK417/G28 Series, F2, F1 and JACK (Post, Spring and 6" trigger lead included)

    POLARSTAR Switchboard for HK417/G28 Series (Post, Spring and 6" trigger lead included) This switchboard was designed specifically for use in VFC HK417 and G28 series gearboxes. The top of the board is designed to lock into the…

    € 54,90
  • POLARSTAR Complete Seal Set, MRS Regulator
    POLARSTAR Complete Seal Set, MRS Regulator

    POLARSTAR Complete Seal Set, MRS RegulatorSet includes:∙ 1x M1.5 x 2.0 (Buna 90) - Tank Pin OD
    ∙ 1x M1.5 x 7.0 (Buna 90) - Tank Pin Retainer OD
    ∙ 1x M1.5 x 5.0 (Buna 70) - Divider Wall ID
    ∙ 1x M1.0 x 7.5 (Buna 70) - Base…

    € 3,90
  • POLARSTAR Bolt Catch Kit for VFC-V2, M4/M16
    POLARSTAR Bolt Catch Kit for VFC-V2, M4/M16

    POLARSTAR Bolt Catch Kit for VFC-V2, M4/M16This kit is required to mount the original bolt catch and spring found on VFC rifles to the side plate of the V2 Fusion Engine.

    ∙ Kit includes (1) Shoulder Screw and (2) Dowel…

    € 12,90
  • POLARSTAR VFC M4/M16 series Fusion Engine Trigger & Small Parts Kit
    POLARSTAR VFC M4/M16 series Fusion Engine Trigger & Small Parts Kit

    POLARSTAR VFC M4/M16 series Fusion Engine Trigger & Small Parts KitThe small parts kit includes the original trigger, trigger spring and complete safety lever assembly for the V2 Fusion Engine.

    ∙ Compatible with GEN1, GEN2 and…

    € 35,90
  • POLARSTAR Fire Control Unit. Rev 3. Built in MCU
    POLARSTAR Fire Control Unit. Rev 3. Built in MCU

    POLARSTAR Fire Control Unit. Rev 3. Built in MCUThe REV3 FCU follows the classic design of our very first FCU and it is considered to be the finest fire control units on the market. Since it is equipped with an LCD screen and…

    € 111,90
  • POLARSTAR Trigger Lead M240B
    POLARSTAR Trigger Lead M240B

    POLARSTAR Trigger Lead M240Bthis trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as the M240B. They connect the original snap action trigger switch to…

    € 9,90
  • Polarstar. MRS Reg Spring.
    Polarstar. MRS Reg Spring.

    Looking to get a little more "ooph" out of your MRS regulator? Well then you are in luck since this beefy spring will do just that. Changing out the spring can be done in a matter of minutes and will safely increase the output of…

    € 6,90
  • POLARSTAR Switchboard, V2, Fusion Engine,  for GEN3
    POLARSTAR Switchboard, V2, Fusion Engine, for GEN3

    POLARSTAR Switchboard, V2, Fusion Engine, for GEN3

    € 27,90
  • POLARSTAR Micro Regulator and UGS "Universal Gun Stock" Replacement Spring
    POLARSTAR Micro Regulator and UGS "Universal Gun Stock" Replacement Spring

    POLARSTAR Micro Regulator and UGS "Universal Gun Stock" Replacement SpringThe Compact Regulator High Pressure spring is compatible with both first and second generation Micro Regs as well as the UGS and CGS systems. Changing out…

    € 3,90
  • POLARSTAR Original Banjo Fitting, Fusion Engine (1 Piece)
    POLARSTAR Original Banjo Fitting, Fusion Engine (1 Piece)

    POLARSTAR Original Banjo Fitting Fusion Engine (1 Piece)Original Banjo Fitting used on all versions and generations of the Fusion Engine.

    ∙ Price includes one (1) fitting

    € 8,90
  • POLARSTAR Trigger Lead FEM249
    POLARSTAR Trigger Lead FEM249

    POLARSTAR Trigger Lead FEM249This trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as only M249. They connect the original snap action trigger switch to…

    € 9,90
  • POLARSTAR Installation (Brass) Shim Kit, Fusion Engine
    POLARSTAR Installation (Brass) Shim Kit, Fusion Engine

    POLARSTAR Installation Shim Kit, Fusion EngineSet of 4 precision brass shims to aid with proper nozzle alignment. We have included the most commonly used sizes but shims can also be sanded down for precise fitment.

    Set…

    € 12,90
  • POLARSTAR Switchboard, V3, Fusion Engine (all generations)
    POLARSTAR Switchboard, V3, Fusion Engine (all generations)

    Version 3 switchboard for the Fusion Engine (all generations)

    € 34,90
  • POLARSTAR  JST RCY to Small Tamiya Adapter
    POLARSTAR JST RCY to Small Tamiya Adapter

    POLARSTAR JST RCY to Small Tamiya AdapterConverts Female JST RCY Plug to Male Small Tamiya Connector
    Length: 140mm.

    € 7,90
  • Balystik 200PSI Replacment Micro Gauge for HPA Regulator.
    Balystik 200PSI Replacment Micro Gauge for HPA Regulator.

    0-200 PSI Micro Pressure Gauge, 1/8 NPT male Thread

    ∙ Compatible with all pressure regulators with 1/8NPT female thread
    ∙ The pressure gauge is packed in a protective box with foam.

    Assembly recommendations :

    ∙ Use…

    € 12,90
  • Balystik Braided Line for HPA Replica. US Type
    Balystik Braided Line for HPA Replica. US Type

    The Balystik braided HPA line is an original solution for replacing the original macro line of the HPA replicas. Easy to install, it is specially designed to be clipped directly behind your HPA drop-in system and exit under your…

    € 19,90
  • Balystik Scuba HPA Fill Station
    Balystik Scuba HPA Fill Station

    The Balystik SCUBA HPA Fill Station

    ∙ Suitable for fillingpaintball tanks from a scuba tank
    ∙ Works with 3000 or 4500 PSI tanks
    ∙ 5000 psi gauge included

    € 39,90
  • P6-BA-MANO-5000
    P6-BA-MANO-5000

    ∙ 0-5000 PSI Micro Pressure Gauge
    ∙ 1/8 NPT male Thread
    ∙ Suitable for 3000 PSI tank
    ∙ The pressure gauge is packed in a protective box with foam.

    Assembly recommendations :

    ∙ Assembly have to be made by a qualified professional

    € 12,90
  • Trinity 5000 PSI Replacement Micro Gauge for HPA Tank.
    Trinity 5000 PSI Replacement Micro Gauge for HPA Tank.

    ∙ 0-5000 PSI Micro Pressure Gauge
    ∙ 1/8 NPT male Thread
    ∙ Suitable for 3000 PSI tank

    € 16,90
© 2010 - 2024 DutchStockhouse, AirsoftShopNL, Funko & Merchandise | sitemap | rss