BalystiK HPA no return valve male fitting for GBB magazine US Version (Tap kit = P6-BA-HPA-M9TAPKIT)
Artikelnummer: P6-BA-HPA-AS9M-USBalystiK HPA no return valve male fitting for GBB magazine US Version (Tap kit = P6-BA-HPA-M9TAPKIT)
This new fitting is especially made for GBB / GBBR magazine, the air will stop immediatly once you disconnect the HPA line and will keep pressure inside the magazine, very usefull to save a lot of air !
- Slim design
- High flow design allowing to play in semi-auto or full auto with GBB / GBBR magazine
- HEX print inside the fitting for easier installation with M3 HEX key
- Magazine can be used both with HPA and GAS (if installed on another location on the mag)
- Keep air inside the magazine and seals under pressure
- M9X1 postive thread
- US Male HPA connector version for US version HPA lines
Instalation advice / Security warning
- The fitting feature M9X1 male positive thread, so it will be necessary to use a M8 drill and M9X1 Tap
- It is imperative to use high strengh chemical locking thread to ensure seal and strong build.
- Professional installation by experienced gunsmith is strongly advised !
- Never input more pressure than recommended by the magazine manufacturer
- Kepp in mind that even disconnected the magazine have pressure and can fire a bb, never let your magazine on a replica if you don' play.
Installation by a professional is recommended for modifying your HPA magazine because compressed air can pose a risk if the installation is not properly carried out. Furthermore, the fact of exceeding the pressure of green gas (110PSI) can cause property damage and serious injuy.