Polarstar

POLARSTAR Braided Air Line ™ (42" Black) incl. Male Quick Disconnect (QD) Fitting Assembly

∙ Fitted with standard QD couplings
∙ Lightweight carbon stitched line withstands wear
∙ Multi-stitched build helps prevent air…

Bite Sized Fusion Engine

Winner of the "Best HPA Engine" in the 9th Airsoft Players Choice Awards, the dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact,…

Features

∙ Modular design with different output and pressure configurations to be available
∙ Oversized 4mm piston bore for extremely high flow and refresh rate even at only 40psi
∙ Integral tournament lock can be secured…

Features

∙ Modular design with different output and pressure configurations to be available
∙ Oversized 4mm piston bore for extremely high flow and refresh rate even at only 40psi
∙ Integral tournament lock can be secured…

Version 3 switchboard for the Fusion Engine (all generations).

Version 2 switchboard for GEN3 Fusion Engine.

The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica's body. These harnesses are universally compatible with all…

The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica's body. These harnesses are universally compatible with all…

The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica's body. These harnesses are universally compatible with all…

New quality electric wire with RCY connectors ideal replace to your damaged original wire suitable for FUSION ENGINE or JACK devices dedicated custom version for AMOEBA rifle series length: 33cm

Features

∙ Drop in nozzle for PolarStar F2 HPA engines
∙ Machined aluminum construction
∙ Anodized finish
∙ Length: 2.38"
∙ Compatibility: Polarstar F2 HPA Engines Used in VFC SCAR-H Airsoft AEG rifles
∙ Material:…

Features

∙ Drop in nozzle for PolarStar F2 HPA engines
∙ Machined aluminum construction
∙ Anodized finish
∙ Compatibility: Polarstar F2 HPA Engines Used in LCT AK Airsoft AEG rifles
∙ Material: Aluminum
∙ Manufacturer: PolarStar

Features

∙ Cylinder input fitting (M8.75 to 6mm) for PolarStar Fusion Engines
∙ Crush ring included
∙ Factory OEM replacement part
∙ Material: Nickel Plated Brass
∙ Manufacturer: PolarStar

Features

∙ Factory replacement components
∙ Complete set of o-rings
∙ High grade rubber

Gun Sav is specially blended for minimal "stiction", and maximum part movement. Gun Sav adheres to the part, and stays where you put it. Ideal for use on Polarstar Fusion Engine o-rings and Redline Firebase…

POLARSTAR Male Quick Disconnect (QD) Fitting Assembly

∙ High quality, precision crafted HPA component
∙ ​Compatible with standard HPA as well as SLP tanks

The Universal Plugboard is used in all of our MG series kits such as the M249 and is used across all of our systems including the Fusion Engine. It is also useful for custom wiring when a model specific switchboard is not…

The REV3 FCU follows the classic design of our very first FCU and it is considered to be the finest fire control units on the market. Since it is equipped with an LCD screen and joystick you are able to easily scroll through menus…

This switchboard is designed to convert Ares V2 gearboxes equipped with their EFCS MOSFET system and is not compatible with other Ares gearboxes. The board is for our AEG gearbox conversion kits such as the F2, F1 and JACK and is…

Set of 4 precision brass shims to aid with proper nozzle alignment. We have included the most commonly used sizes but shims can also be sanded down for precise fitment.

Set includes; 1pc 0.020", 1pc 0.025", 1pc 0.032", 1pc…

This Foster 23-2 QD fitting is used as part of the QD fitting assembly provided with all PolarStar Air Rigs.
∙ Requires 6mm x 1/8PTC fitting (part# 10000292) to make complete assembly.

Complete seal set for the MRS regulator.

1x M1.5 x 2.0 (Buna 90) - Tank Pin OD
1x M1.5 x 7.0 (Buna 90) - Tank Pin Retainer OD
1x M1.5 x 5.0 (Buna 70) - Divider Wall ID
1x M1.0 x 7.5 (Buna 70) - Base OD
1x M2.0 x 15.0 (Buna 70) -…

Complete seal set for Micro Reg (Covers GEN1 and GEN2)

2x M1.5 x 4.5 (Buna 70) - Body ID
1x M2.0 x 14.0 (Buna 70) - Piston OD
1x Base Seal

The Compact Regulator High Pressure spring is compatible with both first and second generation Micro Regs as well as the UGS and CGS systems. Changing out the spring can be done in a matter of minutes and will safely increase the…

The trigger lead is mainly used for soldering into the existing trigger switch of an AEG gearbox such as on VFC HK417 or Classic Army KAC LMG.

∙ 6" length
∙ 2pin JST ZH series connector to bare lead

Okay, we've all done it. You just finish putting together the gearbox and can't quite figure out what is preventing the shell from closing all of the way. Yep, you just pinched your power leads. Never fear though! Replacements are…

The MCU wire harness is intended for use with REV3 FCU's that feature the built in MCU (Motor Control Unit) for running the replica's box magazine. This model features the standard A&K connector such as used with the A&K M60 and…

The MCU wire harness is intended for use with REV3 FCU's that feature the built in MCU (Motor Control Unit) for running the replica's box magazine. This model is intended for custom wiring and is equipped with the ZH series…

This trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as the A&K M60, PKM and M249. They connect the original snap action trigger switch to the universal…

This trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as only M249. They connect the original snap action trigger switch to the universal plugboard.

∙…

This trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as only M60. They connect the original snap action trigger switch to the universal plugboard.

∙…

his trigger lead comes standard with our cylinder conversion kits such as the F2, F1 and JACK and are used for machine guns such as the M240B. They connect the original snap action trigger switch to the universal plugboard.

∙…

Original Banjo Fitting used on all versions and generations of the Fusion Engine.

∙ Price includes one (1) fitting.

Converts Female JST RCY Plug to Male Small Tamiya Connector
Length: 140mm.

When the original Micro Regulator™ came out it was an instant hit since it was ultra compact yet offered the performance of regulators twice its size. With the introduction of the second generation of this regulator, we’ve…

Features

∙ Modular design with different output and pressure configurations to be available
∙ Oversized 4mm piston bore for extremely high flow and refresh rate even at only 40psi
∙ Integral tournament lock can be secured…

Features

∙ Designed from the ground up as a high performance mechanical HPA system, not a modification of a solenoid operated design
∙ Patent pending valve mechanism provides excellent efficiency and consistent velocity…

Highly flexible rubber air line reinforced with a nylon braided sheath promotes maximum mobility while reducing the risk of kinking.

∙ Standard air line which come with PolarStar Air Rigs. 36"
∙ Equipped with foster QD male…